一.適用:
牛仔布(涂層布,壓光布除外)、硅油布、尼龍布、TPU、PU皮革等。
二.性能指標:
外觀及組成:半透明狀粘稠體,聚氨酯聚合物
布氏粘度:120000~140000CPS
PH值:7.0±0.5
離子類型:陰離子型
固體含量:50%±1
三.特性:
牢度超強、不粘手、高光澤、耐強石磨洗、雪花洗、漂洗、酵素洗、酸洗、耐高溫蒸煮。耐黃變.免過熱型,高附著力。(雙組份)常溫下保存12個月,(避免45℃以上高溫)屬于環保型.
PU853A高牢度牛仔漿白:牢度超強,不粘手,高光澤,水洗牢度超好,高附著力,耐黃變,抗凍型
PU853B高牢度牛仔漿透:牢度超強,不粘手,高光澤,水洗牢度超好,高附著力,耐黃變,抗凍型
四.參考配方
調深色 |
調淺色 |
||
CH-853A牛仔白膠漿 |
20% |
CH-853A牛仔白膠漿 |
60% |
CH-853B牛仔透明漿 |
80% |
CH-853B牛仔透明漿 |
40% |
色漿 |
3-5% |
色漿 |
3-5% |
1008固化劑 |
3% |
1008固化劑 |
3% |
1、印前:先將固化劑加入漿內充分?jǐn)嚢杈鶆,印花色漿添加量換控制在5%以內。 2、印后:印花成品自然干燥24-48小時或180℃壓燙20秒,或180℃烘2~3分鐘即可。 3、加入固化劑的石磨膠漿必須在6~8小時內用完。 |
注意事項:
由于牛仔面料多種多樣,在印花之前需要先行測試。在有涂層的布料上印花,需要測試布料涂層跟PU體系的粘結強度.
Other detailed information
Brand |
Conghui |
Model |
CH853 |
Viscosity |
120000-140000CPS |
PH Value |
7.0±0.5 |
Odor |
/ |
Strength |
100T |
Fineness |
/ |
Appearance |
/ |
Usage |
Color strength |
100% |
|
Fluidity |
/ |
Shelf life |
12months |
Single net weight |
5KG |
Resin type |
/ |
Ionic |
Anion |
Appearance color |
/ |
一.Substrates
Denim (except coated fabric,press polishing fabric),silicone fabric,nylon,TPU and PU leather.
二.Performance indicators
Appearance and composition: transparent viscous body,polyurethane polymer.
Brinell viscosity :120000-140000CPS
PH Value:7.0±0.5
Ionic : anion
Solid content: 50%±1
三.Features
Super fastness,non after-tack,high glossiness,resistant to stone ,snow,bleach,enzyme,acid wash and resistant to high temperature steaming.resistant to yellowing,free of overflashing,high adhesion.(double component)the shelf life is 12 months at normal temperature,(avoid high temperature over 45℃),It belongs to environmental product.
PU853A High fastness denim base white:Good fastness,non-stick hand,high glossiness,excellent wash fastness,high adhesion,resistance to yellowing,anti-freeze type.
PU853B High fastness denim base clear:Good fastness,non-stick hand,high glossiness,excellent wash fastness,high adhesion,resistance to yellowing,anti-freeze type.
四.Reference formula
Dark |
Light color |
||
CH-853A denim base white |
20percent |
CH-853A denim base white |
40percent |
CH-853B denim base clear |
80percent |
CH-853denim base clear |
60percent |
Paste |
3-5percent |
Paste |
3-5percent |
1008 fixing agent |
3percent |
1008 fixing agent |
3percent |
Note:
Due to variety of denim fabric,you should make a test before printing,when print on the coated fabric,should make a test about viscosity between coated fabric and PU system.