一．適用：

本產品適用于棉，滌棉，化纖。

二、外觀組成及說明：

外 觀：半透明糊狀物。
主成分：丙烯酸脂共聚物。
離子性：陰離子型。
[保 存 期]：溫室貯存一年，室溫0-40℃，避免暴曬 或 冷凍。

三、特性

牢度特好、亮度好、抗氧化、配銅金粉顏色不會發暗，手感較軟、水洗不起皮、不易脫落，環保指數達國際織物要求。
四、操作流程：

1) 選擇合適的助劑可以提高印花面的色牢度與摩擦牢度（注意助劑的時效性）

2) 漿體不宜稠，印第一遍（俗稱：打底）至關重要，使?jié){料滲透到面料內部，扎根。 避免“浮漿”脫落。
3) 干透后再進行熱處理，可以降低印花表面粘度，增加牢度。印花24小時后，方可測試牢度。

4）印花工藝： (網紗30-50目)印花 → 烘干、干燥 → 熱處理（120-150℃,2-3分鐘）或熱壓（120-150，8秒）
5） 該漿與金蔥片、七彩片、彩砂調配使用。各種片的投放量以不超過20%為
6） 印花后建議：用120℃-150℃的溫度壓燙8秒左右。

Other detailed information

一．Substrates :

Cotton ,polyester, chemical fiber.

二．Appearance composition and specification:

Mail component:acrylic polymer

Ionic :anion

[Shelf life]:store for one year at room temperature,the temperature of room is 0-40℃,avoid sun exposure or frozen.

三．Features

Good fastness,glossiness, antioxidant,the color will not becomes dark with copper powders,soft hand feel,no peeling,no shelling after wash, the environmental indicators reach the standard of international textiles.

1)Choosing suitable auxiliaries can improve the color fastness and friction fastness of printing.

2)The paste should not be thick,print first time(render)is crucial,make the paste permeate into fabric.avoid “laitance”or shelling.

3)After dry completely and making a heat treat,which can reduce viscosity of printing surface and increase fastness.After printing for 24hours,can make a test about fastness.

4)Printing technology:(30-50mesh )printing→drying→heat treat(at 120-150℃for 2-3minutes)or heat pressure (at 120-150℃for 8seconds)

5)This paste combines with glitter powder, discus powder and color sand to use.The amount of powder do not over 20%

6)Advice after printing:using 120-150℃ to make a heat pressure for 8seconds.