熱燙金漿系列

Hot Gilding Paste Series

一、產品介紹：

1. Product introduction:

本品是一種具有熱熔性能的水性漿料，屬陰離子型，在織物上可起到自然交聯作用，可用于任何紡織品燙金印花。

This product is a kind of water-based paste which has hot-melting performance. It belongs to negative ion type; it has natural crosslinking function on fabrics and can be used in gilding and printing of any textile.

二、產品特性：

2. Product characters:

我司生產的熱燙金漿印制的織物手感柔軟，耐洗及牢度好，富有彈性，本產品具有良好的穩定性，是織物印花最理想的無毒性環保產品。

The fabrics which are printed by the hot gilding paste of our company are soft and washable with good fastness; they are also very elastic. This product has good stability and it is the ideal nontoxic product with environmental protection for fabric printing.

三、使用說明：

3. Usage instructions:

使用燙金漿操作工藝簡易，操作流程與膠漿相似，燙金工藝主要在壓燙時注意幾點細節:

    The operation craft of gilding paste is simple. The operation flow is similar with that of glue paste. In pressing process, gilding craft has some details which need to be in your attention:

1、          完美的燙金效果主要取決于溫度

1. Perfect gilding effect mainly depends on temperature.

2、          壓力和燙金速度之間互相配合的水平。

2. The mutual cooperation level of pressure and gilding speed.

因此要控制燙金質量，應掌握好合理的燙金溫度，燙金壓力和燙金速度，一般來說，電熱溫度應控制在70℃-180℃之間，燙印面積較大的電熱溫度相對要高些，同時各種型號燙金紙（電化鋁）適合的燙印溫度也不同，所以許多工藝方面還需根據實際現場調試。

Therefore, if you want to control gilding quality, you should master reasonable gilding speed, gilding pressure and gilding temperature. Generally speaking, electric-heating temperature should be controlled in the scope of 70℃-180℃. If printing area is large, electric-heating temperature should be relatively high. At the same time, printing temperature of types of gilding paper(electrochemical aluminum) is different. Therefore, many crafts need to be adjusted according to actual site.

注意：熱燙金漿印制完之后，漿越干越易壓燙。

Attention: After hot gilding pastes are printed, the drier of the pastes, the easier of the printing.

特別提醒：我司所提供的資料均以我們的最佳經驗為基礎，但商品在實際使、